In October, 2015, the city of Columbia, SC received about 24 inches of rain in 48 hours. Severe flooding occurred. The storm had an impact on the Broad River, and subsequently created challenges for a local water treatment plant.
This video shows how to adjust, maintain & replace the seals used on the DuraTrac 4 Streaming Current Sensor. Also, it will show you how to resolve any leaking that may occur from the bleed hole on the probe block.
Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results.
Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a…
Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a…
In order to get the most out of your Streaming Current analyzers, it is imperative to keep up with any maintenance needs for the probes and pistons.
End of content
End of content
