The Chemtrac Chlorine Analyzers take online disinfection monitoring to a new level of rleiability. They are accurate, pH independent, and offer a low cost of ownership with a full 12 months between maintenance events. These analyzers are suitable for regulatory…
HydroACT is a versatile multi-parameter monitoring solution for water treatment processes. Key features include data logging, analog outputs, digital communications, and PID control. The systems are customizable and user friendly.
The PC5000 Portable Particle Counter is capable of grab sample liquid particle analysis in the lab, as well as online continuous analysis in the field.
The Laboratory Charge Analyzer Model LCA-3 is Chemtrac’s newest model lab unit capable of performing automatic titrations to determine optimum coagulant dosage of a raw water sample. The LCA-3 is also capable of determining the amount of pH adjustment chemical,…
Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results. The frequency…
In October, 2015, the city of Columbia, SC received about 24 inches of rain in 48 hours. Severe flooding occurred. The storm had an impact on the Broad River, and subsequently created challenges for a local water treatment plant.
This video shows how to adjust, maintain & replace the seals used on the DuraTrac 4 Streaming Current Sensor. Also, it will show you how to resolve any leaking that may occur from the bleed hole on the probe block.
Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results.
Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a…
Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a…
End of content
End of content
